The main performance and technical indicators of the organic fertilizer turning machine

2021-05-03

Among the complete sets of equipments required for biofertilizer production, the fermentation stacker has gradually become a handy tool for replacing labor and forklifts for turning over materials, and is the mainstream product of the trend of significant influential composting wealth development. According to the characteristics of the organic fertilizer turning machine, the characteristics of use in compost production are: when making fertilizer, the turning machine needs to adjust the raw material carbon-nitrogen ratio, pH, and water content, and some auxiliary materials must be added. The primary raw materials and various auxiliary materials that are roughly stacked together in proportion can be mixed evenly by relying on the turning machine to achieve the ideal granulation effect suitable for the granulator.

In the conventional stacker operation, the raw material pellets are fully in contact with the air and mixed, and a lot of new air can be cultivated in the stack, which helps aerobic microorganisms to generate pyrophoric fermentation heat, and the stack temperature rises. When the temperature is high, the new air the addition of the reactor can reduce the temperature of the stack. It forms the shape of high temperature exchange, and various beneficial microorganisms develop and multiply in the suitable temperature range.

The stacker system can process the materials into small agglomerates, make the dense and dense material pile loose and elastic, and form a suitable porosity to facilitate the entry of oxygen.

The raw material of the stacker is fermented with suitable moisture content, and the moisture level of the finished organic fertilizer is below 40%. During fermentation, biochemical reactions will produce new water, and the consumption of raw materials by microorganisms will also gradually release water as a carrier. Therefore, the water is reduced in time during the fertilizer production process. In addition to the evaporation caused by heat conduction, the raw material is turned by the stacker to form forced water vapor distribution.

Our new organic fertilizer manufacturing equipment includes a traverse device, a walking device and a stack turning device. The stack turning device includes two reducers fixed on the frame, and the reducer connected to the respective reducers through a coupling and fixed with spiral blades. Spiral shaft, the utility model has the characteristics of increasing the fermentation rate, quickly decomposing the compost, preventing the generation of odor, and shortening the fermentation time. It is generally applicable to: Fermentation of waste after fermentation and crushing of sugar residues in the fermented raw materials of farms, manure fermentation fertilizer plants, wineries, food factories, and sugar factories.

Products
Tel
contact
inquiry
彩37